High Speed Disperser

 

 

 

 

 

 

Characteristics

Ø        Uses concealed hydraulic lifting system to move the mixing shaft up and down.

Ø        Sturdy design base offers vibration free operation.

Ø        Inverter controlled variable speed motor make the mixer run in step-less speeds for best and optimal mixing speeds from 0-1500rpm.

Ø        Integrated main mechanical body with electric controlled system and hydraulic lifting controlled system in one box makes operations hassle-free.

Ø        The upper part can be adjustable to match the different mixing angle requirement. Hydraulic lifting and Inverter Controlled variable Speed.

Ø        Little air absorption during mixing and dispersing process.
It disperses and dissolves materials to smaller particle size efficiently.

  Ø     No dead corner during mixing. Easy to clean, wide capacity range, various speed control, digital display, stable operation, low noise and long- time continuous operation.

Ø        The finesse is less than 25 micron.

Designs principle and concept

Ø        Units all mixing system, hydraulic system, operation system, control system in one machine body, no extra set of oil box, control box. This will save the machine operating space, and smoothly the operating process.

Mixing shafts

Ø        Made of stainless steel, the fixed fabric was adopted the length distance fixation which fixed from both bearing supporting points. It makes machine very stable while mixing.

Mixing speed

Ø        Variable mixing speed from 0 –1500 rpm.

Upper machine head

Ø        Can adjust the swiveling angle.

Safety devices

Ø        Automatic stop safety system while machine runs over load.

Up/down structure

Ø        To co-ordinate the hydraulic system and electrical controlling system to control mixing shaft up or mixing shaft down.

Operating control box

Ø        Installs on main machine body.

Technical parameter

Model	Capacity  (L)	Main Motor (kw)	Speed (rpm)	Disc Dia. (mm)	Lif(mm)	Pump(kw)	Weight (kg)	Dimension (m)
YT-HD-1.5	≤50	1.5	0-1450	150	600	0.55	300	1.2*1*0.5*0.4
YT-HD-4	≤200	4	0-1450	200	800	0.55	500	1.7*1.5*0.7*0.5
YT-HD-7.5	≤400	7.5	0-1450	230	900	0.55	900	1.8*1.8*0.9*0.8
YT-HD-11	≤500	11	0-1450	250	900	0.55	900	1.8*1.8*0.9*0.8
YT-HD-15	≤700	15	0-1450	280	900	0.55	1100	2.4*2.2*1.1*0.9
YT-HD-5	≤800	18.5	0-1450	300	1100	0.75	1100	2.4*2.2*1.1*0.9
YT-HD-22	≤1000	22	0-1450	350	1100	0.75	1600	2.8*2.7*1.5*1.1
YT-HD-30	≤1500	30	0-1450	400	1100	0.75	1800	2.8*2.7*1.5*1.1

                       

 

 

 

 

 

 

 

 

 

 

 

 

*The above listed Max. Processing capacity is calculated as per water as medium. The model selection should depend on the comprehensive factors such as materials viscosity, specific gravity etc. *If works under special environment such as high temperature, high pressure, explosive, combustible, corrosive etc, correct data is required for correct model selection. *The above data and picture is subject to change without notice. The accurate parameter should be subject to the object. *Not all products are listed. For more, please contact with0086-28-62812183 & 0086-13551201632--Mr Hank Wu