Home > Products >> Dispersers | Paint Device

Dual Shaft High Speed Disperser

Application

It is applied to the industry of paints, inks, pigments, dyestuffs, cosmetics, food processing, pharmaceuticals, electronics materials and other medium to high and low viscosity liquid materials.

Working principle

1.Units all mixing system, hydraulic system, operation system, control system in one machine body, no extra set of oil box, control box. This will save the machine operating space, and smoothly the operating process. 2.Two axils are installed, so the double plate rotates up and down, which produce strong shearing and dispersion capability. Finally, it achieves high-speed mixing, dissolving, and get uniform dispersed function refinement.

Introduction

Features

Ø Liquids mixing, solid blending, wet powder dispersion

Ø hydraulic lift, frequency controlled (for water-based paint)

Ø explosion-proof frequency controlled (such as for oil-based paint)

Ø 2-4 vessels installed, working perfectly

Ø Professional-designed cylinder

Mixing shafts

Ø Made of stainless steel, the fixed fabric was adopted the length distance fixation which fixed from both bearing supporting points. It makes machine very stable while mixing

Speed Adjustment: Frequency Converter

Power Supply: 380V,50/60Hz (Can be customized)

Material: The part contacting with materials is SS304 or SS316L

The part contacting with materials is SS304 or SS316L

Height Adjustment: Hydraulic Lifting

Technical parameter

Model	Motor (kw/hp)	VOL(L)	Dia (mm)	Height (mm)	Speed (r/min)
YT-DXHD -1.5	1.5/2.2	≤50	150	900	0~1420 (0~3000)
YT-DXHD --3	3/4	≤100	200	900
YT-DXHD --5.5	5.5	≤150	250	1000
YT-DXHD --7.5	7.5	≤300	250
YT-DXHD --11	11	≤700	300
YT-DXHD --15	15	≤1000	300	1200
YT-1200-18.5	18.5	≤1200	350
YT-DXHD --22	22	≤1500	350
YT-DXHD --30	30	≤1800	400	1400
YT-DXHD --37	37	≤2200	450	1400
YT-DXHD --55	55	≤3000	500	1600

Remarks

*The above listed Max. Processing capacity is calculated as per water as medium. The model selection should depend on the comprehensive factors such as materials viscosity, specific gravity etc.
*If works under special environment such as high temperature, high pressure, explosive, combustible, corrosive etc, correct data is required for correct model selection.
*The above data and picture is subject to change without notice. The accurate parameter should be subject to the object.
*Not all products are listed. For more, please contact with000086-028-84258235 & 0086-13981706727--Miss Alice Qing

Inquiry：（If immediate response needed, please call (86-28-62812181) or send e-mail to kf@yonton.com）

Print |

top

Name
Tel
Content
ValidCode	Refresh